Low vs. High stored Energy Recrystallization Textures in Interstitial Free Steel, presented by Leo A.I. Kestens, Ghent University

It is well known that the crystallographic texture is of paramount importance for the anisotropy control of a wide variety of material properties. E.g., for Non-Oriented grades of electrical steel the θ-fiber texture (<001>//ND) provides the best prospect for optimizing the magnetic properties. However, after conventional cold rolling and annealing of (ultra-) low carbon steels the γ-fiber texture (<111>//ND) appears, which is precisely opposite of what is necessary for the magnetic properties. One alternative to conventional cold rolling is warm rolling, i.e., rolling at elevated temperature but below the Ac1 temperature. It is well-known that recrystallization after warm rolling enhances the θ-fiber texture. However, the structural origin of this drastic texture change as a function of rolling temperature is not well understood. In this talk the recovered structure just before the onset of primary recrystallization is analyzed in detail on an interstitial free steel, which can be regarded as a model material for all ultra-low-carbon steels. A remarkable and statistically relevant difference is observed between the dynamically recovered structure after warm rolling to a reduction of 80% at 550°C and after static recovery at 500°C of a cold rolled sheet rolled to a reduction of 75%. It will be explained how subtle substructural differences are of crucial importance for texture formation during primary recrystallization.

Add to Google Calendar Add [event name] to Google Calendar

Upcoming Events

  • April 23 2025

    1:00 PM ET

    Materials Science and Engineering

    Ph.D. Thesis Defense

    "Characterizing the Structure of Highly-Alloyed Electroceramics" presented by Charles Evans

    Doherty A303

  • April 25 2025

    10:00 AM ET

    Materials Science and Engineering

    Graduate Student Seminar

    Oxide Dispersion Strengthening via Additive Processing: A Revolutionary New Approach for High Temperature Alloys, presented by Michael J. Mills, The Ohio State University

    McConomy Auditorium, First Floor Cohon University Center

  • May 7 2025

    3:00 PM ET

    Faculty Insights with Erica Fuchs

    Please join us for CMU Engineering's virtual program, "Faculty Insights: A 20 Minute Briefing." In this series, faculty will share insights into their research, its impact, and provide perspective for the future of the field.

    Virtual, link provided to registrants